Mini rack - Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mini rack frame part
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom mini network rack
This is not a 10 inch rack because I had an Ender 3 V3 KE so I couldn't print 10 inch parts so I created this.
Width: 240.00mm|
Depth: 244.85mm
The depth part was a mistake because it should have been 240mm but I'm to lazy to adjust everything since it all works.
I used the 6 HE rack rails, with my design you always lose 0.33 HE on the top and bottom.
The parts are pressed into each other and then rack rails are pressed into the width braces.
I have been running this setup for a while and I have not experienced any issues.
You can always buy longer rack rails, whatever fits your need.
Materials:
4x Rack rails in your desired height
https://www.amazon.nl/dp/B00LFSC2BG?ref=ppx_yo2ov_dt_b_fed_asin_title
Its made up of 2 parts.
1. Width brace. Print total: 4 times
2. Depth brace. Print total: 4 times
I have printed everything in PETG because it's more heat resitant than PLA.
Files:
Width-brace.stl
Depth-brace.stl
Frame.3mf, this is a model of the frame assembled as seen in the picture.