Philips Series 2300 cup stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cup stop
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After litres of milk ended up in the drip tray because i didn't pay attention to place the cup far ahead enough, i made myself a little helper.
It snaps into the cover of the drip tray and the cup side is 81mm in diameter, fitting my 80mm cups nicely.
Uploaded 3mf because i needed to combine several parts to make it print like i wanted it to be.
Since i experienced the distance might be still to low, depending on how the milk foamer is exactly placed, i added another model which brings the cup additional 3mm to the front. That worked even better for me.
The grid pattern comes from the infill, so print it without top- and bottom layers.