MT ASCENT - Model Turner Rotating Table with adjustable height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MT Ascent - Model Turner Rotating Table with adjustable height
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
MT Ascent - Adjustable Height Model Turner / Work Table
This is a print in place, Quick Operation Height Adjustable version of my original Model Turner, the adjustment range is 135mm to 200mm, the base can be used with all my other Model Turners apart from MT VICE - Rotate & Tilt.
You will need to activate Organic / Tree supports everywhere, It uses quite a few but they are easy to pull off with a pair of needle nose long pliers.
When bringing the base into the slicer, bring in as a single model or alternatively as soon as you load the model in select both items in the menu on the right, right click and select merge to combine them into one, so you don't accidently misalign them before printing as they could stick together.
Highlight the two bodies using the menu on the right, right click and merge if you didn't bring it in as a single model.
There is also a threaded version available to download which has a height range from 100mm to 200m. Its slower to adjust but works well and has more precision if its something you need.
