1 / 3
Travel Lid & Stand for Adafruit Macropad RP2040 Snap Fit Case — zdjęcie 1
1 / 3

Travel Lid & Stand for Adafruit Macropad RP2040 Snap Fit Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A travel lid and stand for the snap-fit case for the Adafruit Macropad RP2040.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a lid to protect the buttons and the encoder while carrying the Adafruit Macropad when traveling. It is made to work with friction. The dimensions are just so that it is close to the buttons, but either they are touched slightly or are not touched at all, so that they cannot escape or disconnect.

On the pictures, there is one protrusion, as I first printed a v1. After printing, I added a second so that it can be balanced and also act as a stand. The downloadable files are only of v2. 

Printing instructions:

  • Printable in PLA, PETG or FLEX;
  • Check the tolerances of your printer in advance, as the box works on friction;
  • Infill: adaptive cubic 15%;
  • 2 perimeters.
  • 0.2 Structural Preset;
  • Use snug or organic supports - do not do automatic painting, instead paint 4 evenly split under side that is up and one line on each of the protrusions.

Happy printing! If you print, please post a make.

 

Tagi