18650 Cells Parallel Stackable Tray with Screws – No Welding Required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
18650 parallel stackable tray with screws, no welding required. Holds 10mm busbars, stackable, and strong. Print in ABS
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
18650 Cells Parallel Stackable Tray with Screws – No Welding Required
This tray is designed for parallel connections of 18650 cells, featuring a slot for a nickel or copper strip up to 10mm wide. It allows for secure assembly without the need for welding, making it ideal for DIY battery builders, energy storage projects, and cell balancing setups.
⚠ CAUTION: Ensure proper cell orientation before installation. Incorrect positioning can cause a short circuit, which may result in fire or damage.
🔧 Key Features:
✔ No Welding Required – Secure cells in place using screws.
✔ Stackable Design – Easily expand capacity by stacking multiple trays.
✔ Supports up to 10mm Busbars – Works with both nickel and copper strips.
✔ Optimized for Strength – Print screws and mounting areas with at least 80% infill (recommended 100% for maximum durability).
✔ Material Recommendation – Best results achieved with ABS or PETG.
This model is part of my DIY500AMP.COM series designed for safe and reliable battery builds.
🔗 Check out my other models, including 21700 and custom cell holders!