1 / 1
Guitar Fretboard Radius Sanding Block (Hi-Res) — zdjęcie 1

Guitar Fretboard Radius Sanding Block (Hi-Res)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Most common sizes of fretboard sanding blocks but exported with lower angle deviation so the curve is smooth.

Ocena
5 / 5
Polubienia
47
Pobrania
302
Wydruki
1
Wyświetlenia
787
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Share Alike

Super basic fretboard sanding block with high resolution export settings I noticed some of the other radius block STL's didn't have smooth surfaces and were more polygonal than curved so I made my own and figured out the onshape export settings needed to not turn the smooth radius into a polygon.

Infill: Yes, depends on which type you're using but 15-20% should be plenty

Supports: None, can be printed on either of the flat ends without supports

Adhesion: Yes, A brim of 2-3mm or wider is HIGHLY recommended

The rest is up to your discretion, happy printing!

Tagi