Sewing Machine Seam Guide with Double Magnet Slot - Keeps Fabric Straight & Holds Sewing Pins!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It acts like a fence, keeping your fabric in place as it feeds through. It's also easy to keep your pins as you sew.
- Ocena
- 4,9 / 5
- Polubienia
- 205
- Pobrania
- 723
- Wydruki
- 10
- Wyświetlenia
- 3470
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed a new version of the seam guide with two magnet slots. This one has a 5mm-wide edge to hold down thicker or fluffy fabric while sewing. I also found that with strong magnets, it works as a pin holder too!
Here’s what it does:
- Acts like a fence, keeping your fabric straight as it feeds through.
- Holds pins with the magnets as you sew.
- Presses down thicker or fluffy fabric ends when sewing with extra seam allowance.
Just add two strong magnets, and it’s ready to use!
Size:
Width: 57.5 mm
Height: 20.8 mm
Thickness: 4.5 mm
STL files available in different magnet size:
- Ø 10 x h 2 mm
- Ø 10 x h 2.5 mm
- Ø 10 x h 3 mm
- Ø 8 x h 2 mm
- Ø 6 x h 3 mm
Need a different size? Let me know in the comments!
Happy sewing! 😊
My Print Settings:
- Printer: Prusa MK4S
- Layer Height: 0.20mm
- Filament: PLA+
- Infill: 15%
- Supports: None
- Brim: None
If you're using OpenSCAD, you can grab the SCAD file and tweak the parameters to fit your needs.