Utility Razor Blade Container - Minor Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Utility Razor Blade Container - Minor Remix
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 244
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The original description hasn't changed.
“designed this case to be able to hold standard, utility razor blades. The bump and indentation combination on the lid and base allow it to snap in place so it doesn't fall apart without prying.”
One thing I would recommend is printing at .28mm layer height. There is an oddity in the model (which I couldn't even find in Fusion 360) which is seen at layer 7 if printed at .2mm. If you print at .28mm, it doesn't show up.
Also good to know is 3 of these fit in a 4x4 gridfinity box well. I'll be printing one up and maybe update this remix with a pic.