1 / 3
Dust Collector for shop vac and 5 gallon bucket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print the SVcone as a spiral vase, ideally with an E3d volcano. Mine has a 1mm nozzle.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Print the SVcone as a spiral vase, ideally with an E3d volcano. Mine has a 1mm nozzle. The other parts can print however. My printer is 300mm square bed, so I designed a dust collector vortex funnel that would make good use of the space. sized the inlet and outlet nozzles for a 1.25" shop vac.
Print instructions
Category: Parts
