Large to Small Multifunction Arm Mounting System Adapter Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of plates that allows for the use of the original sized mounting clamps with the small arm system.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This adapter plate allows the use of the large clamp base with the small arm version of the Multifunction Arm Mounting System (I didn't find one already made). It's a simple plate that uses M3 hardware to attach the smaller bits. The larger outer perimeter holes were sized for M4 on the plate. STEP files included in case people want to adjust sizing.
There are 2 versions of this file. One that aligns the smaller holes with the larger and one that rotates them 45 degrees. These should be printed with the same settings as the system as recommended in the mounting system linked below.
The Multifunction Arm Mounting System designed by @RostaP can be found here.