1 / 2
12v 2A LED Power supply case S-25-12 Aliexpress
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for power supply. Must be printed in ASA or PETG due to temperature risk
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 504
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (22)Powiązane
Power Supply for LED driver. Needs 2 M3 screws and bolts to secure the device to the case.
CANNOT be printed in PLA! The powersupply risks to get above 50 C hot and might melt PLA plastic. Ideally print this in ASA, ABS or similar high-temp plastic.