1 / 7
CubeBot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10cm tall robot that can transform into a cube, joints made of elastic.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 209
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (3)Powiązane
105mm tall robot that turns into a 38mm³ cube. this model is designed to use 2mm thick elastic cord.
I printed mine with:
- Ender 3 Neo
- 0.4mm nozzle
- 0.2mm layer height
- 10% infill
- PLA+ from inkstation
- Only the torso requires supports
- I would recommend mouse ears for the foot piece
- I would recommend sanding contact areas with rough(ish) sandpaper to stop joints from spinning easily
Parts list:
1x head
1x torso
1x hip
2x hand
2x lower arm
2x upper arm
2x thigh
2x lower leg
2x foot
the lower arm and lower leg are interchangeable
https://www.officeworks.com.au/shop/officeworks/p/kadink-white-round-elastic-2mm-x-5m-showk0124
Stringing guide:

blue line is elastic cord
- Thread foot, lower leg, thigh and hip, tie a knot one one side
- Stretch the elastic on the non-knotted side and tie a knot as close as you can to the plastic parts, repeat for the other leg
- thread the hip, torso and head and repeat the knotting process
- you should know how to thread the arms by now.
Additional info:
dm me for design files, don't ask for me for other choices for the elastic cord.