Qidi Q1 Pro toolhead vented mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
saves about 20g, better internal cooling, additional fix points with rubber rings to keep the front cover in place
- Ocena
- 3 / 5
- Polubienia
- 25
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 1248
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Based on the original Qidi model, saves about 20g
uses 5 mm magnets (check fitting depth, you may require 1 or 2 per side, or just edit the model to fit original 4mm magnets)
NOTE - your build area will be reduced by 8mm, so you have to adjust printer.cfg accordingly
position_min: -1.5
position_endstop: -1.5
position_max:242
mesh_min:24,15
mesh_max:226,230
materials - any heat resistant will do, composites proffered due to less warping.
i didn't like abs for the fan duct, so decided to make it of “conjure rigid” on my resin printer
fix the front and back covers with rubber rings on the hooks, the front part wont fall on the buildplate in a case of failed print