1 / 4
Cutlery drainer basket / kitchen utensil holder - Hanging / Suspended
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanging cutlery drainer for 6 mm wire, drips into a tray. Main: 190×160×71 mm. Includes teaspoon addon.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 1211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
This is a cutlery drainer designed to hang from a (max) 6.5 mm wire or part of a dish rack (such as in the photos) and drip into a tray underneath. The main, larger compartment measures 190 x 160 x 71 mm, fitting for tablespoons and small knives. The smaller addon is useful if you need to store tablespoons & similarly sized objects.
Print Instructions
- Material: Suitable for PLA or PETG
- Supports: Not required
- Bed Adhesion: Printed with a brim, but you may try printing without one depending on your printer's adhesion performance
- can fit diagonally on Bambu lab A1 mini 18x18 bed
