1 / 5
Print in place 'Clickon Bottle Carrier' with carabiner hook — zdjęcie 1
1 / 5

Print in place 'Clickon Bottle Carrier' with carabiner hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print in place 'Clickon Bottle Carrier' with carabiner hook for transporting PET or glass Bottles up to 1 liter

Ocena
4,667 / 5
Polubienia
20
Pobrania
64
Wydruki
2
Wyświetlenia
279
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 18.02.2025: Added a version with a closed ring.

A print in place  'Clickon Bottle Carrier' with carabiner hook for transporting PET or glass Bottles up to 1 liter.

To fix the carrier with the integrated carabiner hook to a backpack ore something else, press the bar sideways to open it.

Use one carrier per bottle to carry as many units as you want.

This is an easy to print model with a movable joint. 

With a MMU3 easy printable in two colors (see cover picture)

Printing instructions:

  • 0.4 nozzle
  • 0.2mm Speed
  • 15% infill
  • no supports needed
  • using PETG will make it more durable, PLA should work also
  • after printing, first gently move the swivel until it comes loose. Then turn it a few times until it moves easily

If you need a more rugged carrier, set infill to 25% and the fill pattern to gyroid.

Using 3 perimeters makes it even stronger but its more difficult to clickon.

Tagi