1 / 2
3 & 4 mm Hex Key/Allen Wrench Crank Handles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crank handle for 3mm and 4mm keys/wrenches.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Just insert the wrench, twist, and lock in place. If you need extra torque to tighten or loosen a bolt or screw, just unlock and twist to expose the short arm rather than remove completely. For added comfort you may want to wrap electrical tape on the handle or, better, heat a short section of shrink tubing onto it.
Printed in PETG, 50% infill. I prefer to print at 45 degree angle, slot-side up, support on build plate only, although printing slot side down (support on build plate only) also works.