Chirak EZ (Official) - Moki Picks Magnetic Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the official models for the 44 Delta Chirak EZ pick handles (magnetic handles for Moki-Picks® picks).
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
44 Delta is proud to make the Chirak EZ magnetic pick handles available for you to print at home. These handles, complete with required magnets, can be purchased at the following link: Chirak EZ Pick Handles
These handles make the Moki picks more comfortable in the hand. They add width and thickness, as well as being generally easier to grip.
For a single pick you will need 1 Handle A and 1 Handle B. These two files are different from each other and are intended to mate together.
Project File Organization
In this project you will find several groupings of files (STLs) to suit your needs:
- Basic - Simple single color pick handles.
- 44 Delta Themed - Want to go big and print the 44 Delta themed version of Chirak EZ pick handles? Here you go!
Required Hardware
You are going to need magnets! These handles are designed to use 1/4in x 1/16in N52 disc magnets (emphasis on the N52 grading). You have two options:
- Support my small business (44 Delta) and purchase admittedly over priced magnets that are the same ones I use in the pick handles I sell: Magnets from 44 Delta
- Source the magnets yourself. Before you head straight to Amazon though, you should be aware that most magnets sold there with a claimed rating of N52 are anything but that (far weaker). Ask me how I know ;)
You will need 8 of these magnets per pick.
Assembly
Sandman Review
Printing
- Orient each half of the pick handle so that the the face (outside) of the handle faces the print bed
- 15% infill
- No supports
- Enable variable layer height and use small layer heights for the first layers (where the fillet around the handle is), and in the area where the two rails above the magnet channels are
- .2 layer height for the rest is fine
- For the multi color models, split the object into its constituent parts and color as needed