1 / 1
AvionRC Ikon 3 O3 TBS M10 GPS Mount — zdjęcie 1

AvionRC Ikon 3 O3 TBS M10 GPS Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement to add a GPS

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

This mount replaces the stock O3 camera mount and is specifically designed for the TBS M10 GPS, possibly fits others aswell. The camera mount also allows more tilt angles than the stock one and discards the mounting slot for a better alignment. The holes in the back are for a ziptie so it is mounted in two spots. It weighs around 1g more than the stock mount. Should be printed in TPU with 2 perimeters and zero infill so the camera is softmounted.

Print Settings

Supports:

Yes

Resolution: 

0.1mm

Infill:

0%

Filament Material: 

TPU

Notes:

2 perimeters only

Tagi