1 / 3
BTT Eddy Mount for Micro Swiss NG Revo
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FEB 17, 2025 edit:I added a second model that I'm currently using. I was having an issue where PETG would leave globs…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 249
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Aug 2025 edit: Added a new mount that uses heat inserts along with a slim case for the eddy, allowing it to pretty much sit right up to the NG shroud. I doubt it'll work with a stock Eddy casing.
FEB 17, 2025 edit:I added a second model that I'm currently using. I was having an issue where PETG would leave globs of filament that the eddy would collide with while printing and would cause layer shifts. I removed the cover from the eddy to give me a bit more clearance. Reworked the model so it would take heated inserts and to give the eddy some space for components on the board.
Designed this really quick to mount a BTT Eddy sensor to my MicroSwiss Revo NG. Not sure if it'll fit a non-revo version.
Category: 3D Printer Accessories