1 / 2
BTT Mini 12864 LCD Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT LCDs have a longer button and the hole for the knob was too big and let out too much light, so I made the hole…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
BTT LCDs have a longer button and the hole for the knob was too big and let out too much light, so I made the hole smaller and extended the button past the surface to accommodate the longer length.
edit: made a v2 that has a flush face. I also didn't like how the light was shining through the front, so I made the front thicker and the gap around the x button smaller. Haven't tested it to see if the button clears, so may change if it does not.
Category: 3D Printing