1 / 1
Cutting Jig for Ultralight Carbon Tent Stakes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig used to make cutting arrow shafts for tent stakes easier/safer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cutting jig I created to make cutting down recycled arrow shafts for tent stakes safer/easier.
One outside slot is all the way through to allow the ends to be cut off the arrow.
The middle slot is 8" and the other outside slot is 6" I used a jig saw at max speed to make the cuts. wrapping sections to be cut with masking tape helps with splintering. Be sure to wear safety glasses and a mask, you don't want carbon in your eyes/lungs.
Printed in PETG, .28mm Draft and 15% infill