Hex Screw Clamp with Gear output
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've seen these motors on sciplus for years now, and just recently saw them on amazon.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
I've seen these motors on sciplus for years now, and just recently saw them on amazon. Since their popularity means other people might be using them, here is a model that makes mine much more useful. Included is a picture of the kind of motor I designed this for.
Instead of using the outer edges of the threads as a shaft, or paying almost a thousand dollars for a tap set for 7/16 ACME threads, clamp these to either side of the screw shaft and drive something with 40mm hex.
Needs 6 m4 nuts and 6 30mm m4 screws. New version includes provision for an M3 setscrew(optional). will require two m3 nuts and two m3 setscrews.
There is a gear on the shaft for driving a rotary encoder. Also included a gear for the encoder.
For the curious, I use this to drive gears like the big one included in this thing.
Print instructions
Category: Parts