Named Garden Herb Stakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Named garden stakes for signage and garden organisation.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Key Measurements
The models are designed as 100mm x 5mm x 20mm (W x D x H). The hole is 5mm is diameter. All edges are 0.5mm filleted.
Printing
The model has been printed using PLA on a Bambu P1S with a 0.4mm nozzle. To make the model appear less like plastic, the Hilbert Curve pattern was used on the top and bottom surface, and fuzzy skin was enabled with 0.2mm point distance and 0.1mm thickness.
Without using multiple materials, pause the print on the layer that the text is recessed i.e. layer 56 of 61 when using a layer height of 0.2mm, cover the layer with ink, paint or coloring of choice, and restart the print.
Custom Named Models
The font used on the models is Bohemian Typewriter by Lukas Krakora and is available to download from dafont. The names are 5mm in height, right aligned with an offset of 5mm from the hole, and extruded by negative 0.5mm. A model without any name has been uploaded.
Please send a message or leave a comment if you would like me to generate any custom named models to be uploaded.