Garden Hose Washer - EASY TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy TPU/FLEX print - 6 garden hose washers that live between the hose nozzle and the hose end.
- Ocena
- 4,8 / 5
- Polubienia
- 105
- Pobrania
- 790
- Wydruki
- 6
- Wyświetlenia
- 2567
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
An easy “my first TPU” print for those starting out - and very useful. Presenting a simple garden hose end washer - complete with little tabs to prevent it from falling out once installed in your hose nozzle or sprinkler head.
Update: Added single item STL file version of this model on July 17 2022
How to print:
.3mm draft mode, any FLEX or TPU profile you like. Use either FLEX or TPU filament. Shore 95 to 98 gives a serviceable washer, although quite hard (tighten mightily). Shore 80 to 85 (Ninjaflex) gives you a beautiful washer that is quite pliable.
As sliced here uses Concentric top fill and bottom fill patterns - better leak prevention than a cross hatch.
If you have never printed TPU or Flex before, be sure to use something like glue stick or elmers glue on the bed to allow a good release and not damage your PEI surface. If using a prusa MK3S/+ printer, back out the tension on the extruder gears to the last two threads.