Ikea LACK enclosure side panel -Prusament spool recycled-
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Let's make a side panel for Ikea LACK enclosure using Prusament spools...!
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 98
- Wydruki
- 3
- Wyświetlenia
- 1999
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by imakina's nice Prusament connector design, I’ve got an idea to use it for side panel of my Ikea LACK enclosure, the compartment underneath the printer.
This wall has total 426mm of height, it is intended to use together with 28mm height table connectors => https://www.printables.com/model/105530-ikea-lack-table-connector-for-enclosure-h28mm
To make a whole panel, you need to print
- 2x “Panel 1 corner”
- 2x “Panel 1 corner mirror”
- 2x “Panel 2 middle horizontal”
- 2x “Panel 3 middle vertical”
- 1x “Panel 4 center”
- 4x “Center circle”
- 4x “Corner bracket”
Other than those printed parts, you need 2x Prusament spool and some tapping screws (I use 3.5 x 16 but similar size would be OK too)
For printing, no support necessary although there are some bridges.
Update 29.05.2022
Added “Center circle with 2 switch slot” for those who relocates the main switch of the printer. you may use next one for LED light or any other application. Unlike other parts, this parts needs support on the switch frame area
.