Two-piece glasses case with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My wife requested a glasses case so I made her one with 5x5x5 magnet cubes I had laying around.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Printed in Verbatim PETG 0.2 mm layers.
Make sure to insert the magnets with the same poles in both holes of the bottom piece and the opposite poles facing down on the top piece. I found it easier to push the magnets into the bottom piece and place the second magnet on top of the installed magnet and then to push the top piece on top of those magnets which pushed the magnets into the top piece. It was easier to push the magnet inside this way plus no way to mess up the magnet orientation.
Made for 150x51 glasses. Don't know the last dimension.
If you like this case and would like a different size, send me a message and I'll share the Fusion 360 source with you.