1 / 5
KENKO KK-613D Desk Watch Case and Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is created as a replacement for its original case, mine broke, so I made this one.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I created this model to replace its original case. I changed the design a little bit after those photos, I used the original mounting part with screws in those photos, but later, I modeled a mounting part to print and use with it. Furthermore, I made mounting holes exactly 1.75 mm in diameter, so anyone can print and use it without external parts or screws, you can use a single piece of filament to assemble it. Don't forget to melt or glue both ends of the filament that used for assembly :D
Recommended Settings
- 0.4 mm nozzle
- 0.12 mm layer height
Notes
- I used PLA with 0.4 mm nozzle for printing this model.
- It doesn't need to be detailed, but be careful, mounting holes can be crude on higher nozzle size and layer height values.