Hart 40v Charger Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the charger horizontally, allowing you to wall mount it.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 312
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This model holds the Hart 40v battery charger horizontally for wall mounting. There is a loop for using a zip tie to fasten the power cable into the channel and there is a pocket to allow the strain relief to bend into place. The cap requires 2x M3 socket head screws. A window is included in the top for convenience, allowing you to see charging status and the messages on the label.
I printed in PETG with 5 walls and 15% gyroid infill. Holds the weight of the 4AH batteries without issue. I don't have any bigger batteries, but you could always hedge your bets with some hot glue or other adhesive on the charger. I don't think the larger batteries have different critical dimensions, but if they do and you need to modify the model, the Fusion file is included.