Cable Channel chain for Neptune 4. For bed Z.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I reverse engineered and reworked the models, and also created new ones.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Please feel free to write to me personally what is wrong and what needs to be fixed.
Designed and tested and printed on Neptune 4.
The angled chain with a bend is added to align the axis of the wires exiting the case with the axis of the wires exiting the table.
For the chain, the body needs magnets, diameter 3 height 2. I took them from the Vaporesso Luxe Q cartridges. I also added a model without holes for magnets and it can be attached to double-sided tape.
Since I set up a profile for plastic in the models, I did not make large gaps in the parts, so before printing it is worth calibrating the profile.
Printing:
Width 0.4, layer height 0.2, PTG plastic.
Chains 14 pcs. Hook 15 pcs.
!!!!! Assemble the chain after printing, twist it back and forth for 5 minutes to smooth out the spikes, and it will be super good to add a drop of lithol to the spikes on each side. !!!!!
I took the usual chains that are laid out everywhere as a basis and redid everything for accuracy and beauty.