Minimalist scope throw lever for Vortex Diamondback HP 4-16x42
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
minimalist scope throw lever to aid in zooming in and out. 42mm internal diameter.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a scope throw lever that was thinner than others out there in order to fit with how my scope was mounted onto the rail. This thing is about 6mm wide, just wide enough for the M3 nut to nest into the side. At 6mm thick, this isn't quite as robust as some of the other throw levers out there, but hopefully you're not banging your scope around hard enough for that to matter.
This was modeled for the Vortex Diamondback HP 4-16x42 I have mounted on my 1022, but will work on any scope with an adjustable zoom dial that is 42mm wide. The internal diameter of the throw lever is 43 mm, but tightens down to fit with an M3 nut and bolt.
I used a M3*12 because the M3*8's I had were a bit too short and I didn't have any M3*10s on hand. I think an M3*10 would be ideal, but haven't tested it. If you do, let me know how it works!