CRF300L HeadLite - Various Navigation Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collection of various navigation mounts which fit on my CRF300L HeadLite Navigation Tower.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 815
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a collection of various navigation mounts which fit on my:
Questions? You can post them on reddit or advrider.com
If you want, you can buy me a coffee.
Chigee AIO-5 Play
Requires 3D-printed parts:
CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
CRF300L – HeadLite – Navigation Mount Chigee Ver 1.0.stl
This design does not reuse the bolt of the Chigee. Instead you need 2 bolts M3 x 10 mm and 1 bolt M5 x 10 mm. The 10 mm is the length of the thread. Do not use longer bolts. The Chigee has a damper build in. Longer bolts will go through the damper and touch the device, conducting all vibrations.
Quadlock (MK 1)
Requires 3D-printed parts:
CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
CRF300L – Headlite – Navigation Mount Quadlock Ver 1.0.stl
Quadlock (MK 2)
All-in-one Navigation Bracket for Quadlock.
Requires 3D-printed parts:
CRF300L – HeadLite – Navigation Mount Quadlock Ver 2.0.stl
Initial version
CRF300L – HeadLite – Navigation Mount Quadlock Ver 2.2.stl
Adjusted for HeadLite Ver 2. Sits 5mm higher and 5mm closer to the dashboard. Also has a loop to attach the cable of your charger.
AMPS
Requires 3D-printed parts:
CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
CRF300L – HeadLite – Navigation Mount – AMPS Ver 1.0
An AMPS-plate can be mounted at 3 positions using M5 countersunk bolts.
The Navigation Mount can be used with or without the supports. In case of bolting the mount directly to the Headlight Frame (without supports), the holes need to be enlarged to 6 mm instead of 5.
Basic
Requires 3D-printed parts:
CRF300L – HeadLite – Navigation Support Clutch Ver 2.0.stl
CRF300L – HeadLite – Navigation Support Throttle Ver 2.0.stl
CRF300L – HeadLite – Navigation Mount – Basic Ver 1.0
The Navigation Mount can be used with or without the supports. In case of bolting the mount directly to the Headlight Frame (without supports), the holes need to be enlarged to 6 mm instead of 5.