Lego Hokusai – The Great Wave wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Lego Hokusai – The Great Wave 31208, uses a large size 3M command strip to secure a pair to a surface
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 780
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall hanger for Lego Hokusai – The Great Wave.
You will need to change the position of the two hanger components on the backside of the piece, see the attached photos.
The hangers should stay attached to the piece as it is moved around and mounted on the wall. Once the hangers are in the correct position on the wall I would recommend removing the Lego in order for the adhesive to cure overnight.
Print in PLA or PETG, in orientation shown. You may want to ‘key’ the surface for the command strip with coarse sand paper (120,240 grit) as it can be too smooth for the adhesive. Or you can experiment with using some paint on fuzzy skin in the slicer.