Printing Panda's Sewing Machine Seam Guide, remixed for 6mm, 5mm, 4mm x 2mm magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printing Panda's Sewing Machine Seam Guide that accepts 6mm x 2mm (qty 4) or 5mm x 2mm (qty 5) or 4mm x 2mm (qty 6)
- Ocena
- 2 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a quick-and-dirty modification to add additional diameters of magnet pockets to accept 6mm, 5mm and/or 4mm diameter x 2 mm thick magnets.
The original STL form Printing Panda was downloaded and modified in TurboCAD to add the additional pockets.
Please download and like Printing Panda's original design. This remix exists solely to make it easier for someone with smaller magnets to download and print.
For best results, I suggest pressing the plastic onto the magnet sitting on the table until the magnet is flush to the surface of the plastic. That will make it stick to the sewing machine the best. If you press the magnet past the surface, it will have less holding power.
If you find that the hole is slightly too loose or too tight, scale the model by a few percent and reprint.