Prusa Enclosure Side External Phone Camera Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows mounting your phone on either side of the enclosure and using its camera to monitor your prints.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This model allows mounting your phone on either side of the enclosure and using its camera to monitor your prints.
Phone holders usually have a higher mounting point and the view gets obstructed by the extruder fan or other parts of the printer.
In contrast, this one offers a low point of view allowing you to see what is going on at the nozzle.
The holder can be adjusted left or right when attaching the arm to the holder body. It should fit phones up to 9.5mm thick.
On an MK4S, it prints well without supports.
The following is needed for assembly: 2x M3 hex nuts, 1x M3x8 screw, 1x M3x16 screw.