1 / 3
3.5" TFT Display + Taki Udon NFC Enclosure For MiSTer (DE-10 Nano) — zdjęcie 1
1 / 3

3.5" TFT Display + Taki Udon NFC Enclosure For MiSTer (DE-10 Nano)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enclosure for a 3.5" color screen and Taki Udon NFC module to launch cores/games and display associated artwork

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an enclosure that houses a 3.5" color TFT display (https://www.amazon.com/gp/product/B0872S57HG) and UNO board (https://www.amazon.com/gp/product/B07WFZCBH8) combo as well as the NFC Reader from Taki Udon. These devices can be connected to the DE-10 Nano/MiSTer to launch cores/games using NFC tag stickers embedded in GameBoy cartridge shells or by using Taki's NFC cards with the included insert. The screen displays artwork for those cores/games using the TTY2TFT software. Details about TTY2TFT and setting up the display can be found at https://misterfpga.org/viewtopic.php?t=4843. 

Two 4.6W x 5.7H M3 brass inserts and 6mm tapered head machine screws are needed to secure the top and bottom pieces together. The NFC reader is held in place by four 6mm M2 self-tapping screws. An extra screw can also be used to secure the card insert into place so that it doesn't pop out accidentally.

The top part of the enclosure and card insert can be printed together at the same time if your machine is dialed in and has good dimensional accuracy.