Bessey LMU grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better grip for your Bessey LMU 10/5 u-shaped clamp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Bessey LMU clamps are fantastic, but the grip is thin and slippery. This makes it thicker and grippier. Designed for the 10/5 sized clamps but I am quite sure it works with the longer models as well.
Print in TPU
Note! There are two different lengths of the grip area on the clamps, I have one that has slightly longer, look at below pic. The grip area is about 50mm. On my other ones it is about 46mm. So I have two different versions, measure which one is correct.
If you like my work, consider buying me a coffee:
https://ko-fi.com/maildannesholkse