1980-1989 Toyota 4Runner B-Pillar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D scan of a 1st gen 4Runner Bpillar.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 1
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Commercial Use - No Derivative
This is a 3D scan of a 1st gen 4runner bpillar, the model is printable, and it is very large. so you will need a larger printer, or you will have to split the piece up. I was able to print it. I will say that in your slicer, you should drop the scaling on the thickness down to 50% to bring it from 4mm thick to 2mm thick because it was a little too thick on my print.
this bundle is essentially a small business since there are not many people making these, (especially 3d printing them) there is also a lot of demand for these since the people who mold them are always sold out. the price that they sell theirs for are $40 a piece for cut to fit molds.
In this bundle, I attached the models of just the b pillars, and molds for b pillars if you want to go that route. there are solidworks files and stl files.