1 / 4
Filament Guides and tray for a SUNLU Filament Welder — zdjęcie 1
1 / 4

Filament Guides and tray for a SUNLU Filament Welder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This part supports the filament while welding and provides a handy spot for the sleeves to live.

Ocena
5 / 5
Polubienia
48
Pobrania
262
Wydruki
3
Wyświetlenia
1011
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I re-mixed this excellent piece to remove the Gridfinity framework on the bottom and added four divots to use silicone closet door bumpers as non-skid pads. Excellent design. You will need two M2 x 35mm boltslock two together on the end) to use as hinges. Stick the SUNLU down with 3M VHB, but sort out the hinges first, and four nuts ( as there is not much room to work with the filament welder in place.

If you aren’t into gridfinity yet, this might be for you.

Tagi