1 / 5
Ooono No.2 Halterungen und Abdeckung (Remix-Remix) — zdjęcie 1
1 / 5

Ooono No.2 Halterungen und Abdeckung (Remix-Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

OOONO No.2 Halterung mit Abdeckung für VW Passat B8 FL

Ocena
0 / 5
Polubienia
10
Pobrania
122
Wydruki
0
Wyświetlenia
1478
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Auf Anfrage von @onas02_2475218 hier der Remix-Upload

Hi,

hab mir letztendlich auch nach dem Erhalt eines wunderschönen Fotos von mir für einen OOONO entschieden.

Da mir noch kein für mich passendes Konzept über den Weg gelaufen ist, hab ich einfach ein paar Ideen kombiniert und angepasst.
Mit dem Ergebnis bin ich sehr zufrieden.

Gedruckt habe ich alles aus ABS mit Standardeinsttellungen, sodass die Hitze kein Problem sein sollte (ASA wäre vll. noch besser).

→ Lässt sich super in den Lüftungsschlitz einsetzen

→ Die Magneten des OOONO No.2 mit doppelseitigem Klebeband (bereits vorahndenes hat nicht lange gehalten) an der Halterung befestigt. Somit ist auch das mehrmalige Abnehmen kein Problem

→ Knöpfe lassen sich gut und einfach betätigen (Mitte und Oben)

→ kleine Schlitze beim VW Logo reichen für den Lichtkranz

________________________________________________________________________________________________________

At the request of @onas02_2475218, here is the remix upload

Hi everyone,

I finally decided to make an OOONO after receiving a nice photo of myself.

Since I hadn't found a suitable concept yet, I just combined and adapted a few ideas.
I am very pleased with the result.

I printed everything on ABS with standard settings, so the heat shouldn't be a problem (ASA would probably be even better).

→ Fits perfectly in the ventilation slot

→ The magnets on the OOONO No.2 are attached to the holder with double-sided tape (the previous one didn't last very long). This means that repeated removal is not a problem.

→ The buttons are easy to press (centre and top).

→ Small slots in the VW logo are sufficient for the light ring.

Tagi