Cardfight!! Vanguard Power Counters & Crit Token
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is an easy-to-print set of Cardfight!! Vanguard Power Counters and a Crit Token.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
My son and his friends play Cardfight!! Vanguard and a while back I printed out a bunch of Power Counters designed by MintyTwirl (https://www.thingiverse.com/thing:6407326). The counters were great, but I didn't like the way the side facing the build plate came out. So, I decided to give designing my own a go. I went with the standard 6-sided die that allowed me to print with a blank side on the build plate. I added filleted edges to give the counters a smoother appearance and made the engraving depth 2mm for easier reading.
The four Power Counters consist of the following:
- 1K Counter: +1k, +2K, +3K, and +4K
- 2K Counter: +2K, +4K, +6K, and +8K
- 5K Counter: +5K, +10K, +15K, and +20K
- Extra Counter: +1D (for +1 Drive), -1D (for -1 Drive), +PER (for +Persona), and 100m (for +100,000,000)
Printing is really simple:
- No supports needed
- I use a 25% infill, but I imagine 10% - 15% would be fine (I just like a little extra weight)
- I print at .16mm to create a smoother finish but .2mm will also work nicely
- Material: PLA
This is my first go at creating and uploading a model to Printables so please share any constructive criticism you may have. Enjoy!