KPS3 pro s1 update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a project to upgrade the Kingroon KPS PRO S1 printer on the klipper firmware.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a project to upgrade the Kingroon KPS PRO S1 printer on the klipper firmware.
The main thing that makes the project is a beautiful and neat laying of printer cables without lengthening them.
From the upgrades of the printer itself, a table level sensor was added and the Z-axis coupling was replaced, as well as transferred to klipper with the conversion of motors to UART. The configuration file of my firmware is also added to the project, from the installed modules on klipper these are Klipper Adaptive Meshing & Purging and KlipperScreen. Everything was installed according to the documentation on the official project pages.
All parts were printed on a Kingroon KPS PRO S1 with a 0.4 mm nozzle.