92mm Fan Mount with Lockable Ball Joint (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place 92mm PC fan mount that can be mounted and positioned with a lockable ball joint.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was asked to create a way to repurpose some old 92mm PC case fans as air circulators for a small indoor greenhouse setup. This frame can be mounted on walls, overhead, or on a shelf and locked in place with a print-in-place ball joint. The design includes a mount that can be attached via screws or double sided tape to a surface. The frame and attached ball joint then clip into the mount and can be unclipped if desired.
PRINTING NOTES: Supports are not necessary. Print the files in their default orientations. The ball joint should come lose with a light twist. The threaded nut that tightens to hold the joint in position may take some force to loosen the first time but does indeed come free unless your printer settings are such that the threads have fused. Once you get it free it should work smoothly.
Printing in PLA at 0.2mm layer height with 2 perimeters and 15% infill works great on my MK3S+. I would be happy to entertain suggestions for improvements. This was my first shot at doing a print-in-place object.