JKSniper-Remix-Electronics Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slight remix to JKSnipers electronics enclosure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a slight remix to JKSnipers electronics enclosure. I found that the 12v-to-5v buck converter was running extremely hot for the number of LED's I was driving so I modified his case to incorporate a 40mm fan that uses M3 nuts for mounting. I also added some thickness to the front of the case and added screw mounts to screw the front to the back. I've included the left and right mount brackets but those are his straight up - no modification.
The spaces on the original enclosure were near impossible for me to use. I designed a 1 piece spacer that is the same thickness but does not interfere with any of the electronics between the screen and the breakout board.
I also added a reversed option. This would allow you to mount it "upside down" on the enclosure but put the electronics in right side up.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK2.5
Rafts: No
Supports: No
Resolution: .2
Infill: 15%
Filament: Prusament PETG Black