Nexum Galaxy w/Asteroids Expansion Box Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box insert to store Nexum Galaxy and its Asteroids Expansion in the main box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
There was a lot of wasted space with both boxes and the provided inserts were awful at keeping the many tokens in-place so I designed my own. Pretty happy with how it turned out but I haven't played the game yet to know how well it does/doesn't help with setup and teardown.
I printed all parts except the Tray Guards with the following settings:
- Layer Height: 0.28 (but any height should be fine)
- Walls: 2 (arachne but classic should be fine)
- Infill: 8% gyroid to reduce weight
For the Tray Guards, you can print with the settings above but I wanted to make it so you can see through them and have it be obvious you're supposed to remove to get to the components underneath. So I used these settings:
- Layer Height: 0.28 (any height should be fine)
- Walls: 4
- Infill: 8% honeycomb (should be able to use any infill but be careful to keep holes small)
- Top Layers: 0 (to show infill)
- Bottom Layers: 0 (ditto)
I think that's it. Let me know if you have questions and please share your makes!