Talon Adapters for Magnet Embedded Pusher System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters for Straight and Angled Talon Magazines. Requires a Modified Pusher.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapters for Straight and Angled Talon Magazines. Hot swappable and doesn't need to trim the reinforcing ribs in the magwell.
Requires a modified pusher to work with it. Check this collection for more detail.
After inserting it, pull the trigger once before inserting the Talon magazine to make sure the pusher extension is retracted.
Demo
Hardwares
M3 x 5 mm Steel Screw * 1 (has to be made of magnetically attractive material, recommend flat head)
M3 x 18 mm Screw * 1
M3 Nut * 1
Clicky Pen Spring * 1 (4 ~ 5 mm OD, about 20 mm long)
A Short Piece of Filament
Printing
Files are pre-oriented, and don't require support. I use 4 walls on Mag Releases and 2 walls for remaining parts.
Assembly
Check the “Assembly Guide” in other files.