1 / 2
Prusa XL TPU guide clip — zdjęcie 1
1 / 2

Prusa XL TPU guide clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,39 € – 0,47 € netto (bez VAT)

Dla pliku: Prusa_XL_TPU_Guide_Clip_0.4n_0.28mm_PETG_XLIS_25m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,43 € netto (środek widełek).

Masa podana przez autora
6 g
Czas druku podany przez autora
25,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This clip guides the TPU filament from its spool to the print head.

Ocena
5 / 5
Polubienia
75
Pobrania
307
Wydruki
9
Wyświetlenia
1674
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Using extremely flexible SHORE 95A TPU filaments on the PRUSA XL is a challenge because the PTFE tube presents a lot of resistance.
Directly connecting the filament to the head from the spool is not the solution because it causes tangles. 
I first thought of using small segments of PTFE tube to place them but then realized I didn't have any left, so this is a temporary solution that works quite well.

This guide clip guides the filament from its spool to the head.