1 / 3
Sculpfun S9 clip on air assist hose holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bought myself Sculpfun S9 laser engraver and wanted to have removable hose holder for air assist so I designed it.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 307
- Wydruki
- 1
- Wyświetlenia
- 1620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
Bought myself Sculpfun S9 laser engraver and wanted to have removable hose holder for air assist so I designed it. It is designed for 6mm silicon hose (used for aquariums), if you have any other dimensions of hose I have included Fusion 360 file so you can modify the holder. It clamps on stock cooling fan (see photo).
Printing details for 0,4mm nozzle:
- No supports needed
- 3 shells
- 3 top layers
- 2 bottom layers
- 0% infill
I recommend 2mm skirt or brim for better adhesion.