Keyhole Ziptie Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of keyhole-to-ziptie mounting adapters for power strips and other small devices
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a small collection of ziptie mounting adapters that slot into keyholes on power strips and other small devices.
zip tie mount.stp- designed for the TP-Link Kasa HS300 power stripzip tie mount - 90deg.stp- designed for a TP-Link TL-SG108 Ethernet switch, rotated 90 degrees to accommodate the preferred (ports-up) mounting orientation for the switch.
There's no real standardization for these mounts so they're likely to work with other devices. STEP files are provided to make modification easier. Created in Plasticity.
Probably best printed in PETG for strength, but PLA+/Matte PLA is alright. The flat side of the key should be facing down on the printbed for optimal strength, I'm lazy and didn't bother to correct the model orientation.