Sovol SV06 Plus Movement Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple movement test
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This is a simple test for moving X and Y axes for a Sovol SV06 PLUS (do not use it on a regular SV06 as it has a smaller bed) but it works on every printer with at least 300x300 bed size.
I had “something” making noises during printing so i created a simple g-code to move the axes around (only x+y) in a square- and crosspattern, in the end it was a bearing on a belt tensioner.
Make sure you home the printer before you start the G-Code.
Maybe someone has use for it too. Use at own risk!
(You can simulate the travel paths in cura, however orcaslicer does not recognize the g-code as valid)