Kitchen Scale Under-cuppboard Holder

Designed for USB-c chargeable digital kitchen scale models with dimensions 136mm × 190mm × 26mm and of make Shenzen Dihang Electronics, Howeifull Küchenwaage, E-CrossStu GmbH, etc

The slides are a bit shorter, since my cupboard did not have space left for the entire kitchen-scale :-P

Will fit many other similar scales without modifications, as long as the scale has edges of ~12mm in height. 

For all other models, parameters may be adjusted in FreeCAD Spreadsheet, which will auto-generate your variant or just re-scale it in your slicer. 

There are already tons of kitchen-scale-holders online, but even more types of scales exist. So I wanted to share a easily adaptable parametric FreeCAD model, that will hopefully be the start of many remixes for many scales :-)

Print-Recommendations:

• 100% infill
• PETG
• max or reasonable large layer size for your nozzle. e.g. 0.32mm @ 0.6mm nozzle

Installation-Recommendations:

1. fit side of screw-holes with double sided tape
2. slide onto your scale
3. glue/press into spot
4. remove scale
5. press more for good measure
6. use 3mm countersunk screws to fix permanently in place

Parametric adaption

to change the parameters of the model to your needs

1. install FreeCAD
2. open .fcstd File
3. go to Spreadsheet in the tree inside the file
4. change measurements to your liking or needs
5. watch the model change
6. select Body in the tree
7. select Export in File-Menu
8. print